Taroil Light Brown

Taroil Light Brown contains linseed oil, tar and pine – turpentine. Taroil Light Brown absorbs into the wood slowing moisture, rot and fungus affects. Taroil Light Brown gives the wood a beautiful transparent and water resistant surface. Expenditure for lumber 3- 5 m2/ l , plane surfaces 5-10 m2/l . Color: yellow

Place of use

Log houses, garden houses, thermally finished wood

  • Instructions

    Prefinishing: Wooden surfaces, which are going to be finished must be dry, maximum wood humidity under 15%, and air relative humidity under 80%. Old wooden surfaces must be cleaned from dirt, fungus and other removable substances (for example with sandpaper). Directions: Do not need any dilution. Shake well before use and while using. Apply thin layer of Taroil Light Brown to the surface with a brush or a cloth and let it absorb. Remove all unabsorbed oil from the surface. Let it dry and polish the surface before applying the next layer. The amount of layers is 2 – 4 depending on the quality and the purpose of use of the surface Finish the ends of the wooden surfaces with special care. Taroil Light Brown can be toned with paint pigments. Maintenance treatment can be done in a year if necessary. Taroil is not suitable for polished or painted surfaces. Usage for other purposes and against the directions is not recommended. Time for drying: Applied in thin layers 1- 7 days depending on the weather conditions and the material, which was finished.